Pin Gage Libraries

Class X Pin Gage Libraries

A complete gage reference

The most complete gage-reference in-plant availability ever offered as a standard product, the TP10081-L, carries the entire Deltronic range with every .0001” size from .0040” thru 1.0120”, a total of 10,081 gages  including free steel Stor-Gage Cabinets: 5 small, 5 medium, 7 large.

Inch Gage Libraries

TP (.0001” step) MASTER-REFERENCE GAGE-LIBRARIES

Proven in concept, Master-Reference Gage-Libraries offer you an unlimited Class “X” gaging capability as an in-plant resource. Covering your particular range of hole sizes with every tenth (.0001”) step, these single-tolerance gages anticipate every size and accuracy requirement.

Typically, these Master-Reference Gage-Libraries are centrally located, in a standards or inspection facility. As the source of  cylindrical gages for various departments within the plant, they eliminate the duplications and delays normally incurred in obtaining gages to satisfy many small orders for individual department requirements. They present a constant availability as cylindrical masters for setting various measuring tools to precise dimensions, checking a variety of hole sizes in prototype parts, hole spacing and layout work, etc.

Six comprehensive ranges of .0001” (tenth) increment gages satisfy a variety of typical requirements. Ranges begin with .0070” and end on popular fractions (1/8”, 1/4”, 3/8”, etc.). If you are concerned with hole sizes of 1/8” or smaller, select the TP1193-L ranging from .0070” thru .1262”, with every .0001” size gage. Each library provides 12 tenth steps beyond the end fraction for flexibility of measurement around that fraction.

TP1193-L (range .0070” thru .1262”) 1,193 gages in .0001” steps.
Stor-Gage Cabinets: 2 small
$7,366.00

 
TP2443-L (range .0070” thru .2512”) 2,443 gages in .0001” steps.
Stor-Gage Cabinets: 4 small
$14,905.00

 
TP3693-L (range .0070” thru .3762”) 3,693 gages in .0001” steps.
Stor-Gage Cabinets: 5 small
$22,236.00

 
TP4943-L (range .0070” thru .5012”) 4,943 gages in .0001” steps.
Stor-Gage Cabinets: 6 small, 3 medium
$31,789.00

 
TP7443-L (range .0070” thru .7512”) 7,443 gages in .0001” steps.
Stor-Gage Cabinets: 6 small, 5 medium, 2 large
$53,877.00

 

TP10081-L carries the entire Deltronic range with every .0001” size from .0040” thru 1.0120”, a total of 10,081 gages  Stor-Gage Cabinets: 5 small, 5 medium, 7 large
$84,118.00

HT (.0005” step) GAGE-LIBRARIES

HT Half Thousands Gage-Libraries are available in .0005” increments in six ranges within a size coverage of .0260” thru 1.0095”.

When gaging requirements are for functional hole inspection, with tolerances in thousandths…qualification of rejects as to whether they can be reworked…immediately available cylindrical standards providing a master gage that is within 2 tenths of desired size for comparator settings, these Certified HT Gage Libraries, composed of Class “X” Deltronics in .0005” increments, meet your requirements. Even for less exacting tolerances, the low Deltronic price will more than justify your investing in an HT Gage-Library to answer tomorrow’s gaging problem, without production or inspection delays.

HT360-L (range .0260” thru .2055”) 360 gages in .0005” steps.
Stor-Gage Cabinet: 1 small
$2,145.00

 
HT720-L (range .0260” thru .3855”) 720 gages in .0005” steps.
Stor-Gage Cabinet: 1 small
$4,143.00

 
HT960-L (range .0260” thru .5055”) 960 gages in .0005” steps.
Stor-Gage Cabinets: 1 small, 1 medium
$6,169.00

 
HT1200-L (range .0260” thru .6255”) 1,200 gages in .0005” steps.
Stor-Gage Cabinets: 1 small, 1 medium
$7,819.00

 
HT1464-L (range .0260” thru .7575”) 1,464 gages in .0005” steps.
Stor-Gage Cabinets: 1 small, 1 medium, 1 large
$10,753.00

 
HT1968-L (range .0260” thru 1.0095”) 1,968 gages in .0005” steps.
Stor-Gage Cabinets: 1 small, 1 medium, 2 large
$16,556.00

TPF FRACTIONAL (.0001” step) GAGE-LIBRARIES

TPF Libraries are composed of 25 gage sets, each with a center fractional nominal and 12 gages, in .0001” STEPS RANGING DOWN- WARD from the fractional nominal and 12 STEPS RANGING UPWARD.

TPF400-L Library is composed of 400 gages with set nominals of 1/16”. Library includes all 1/16” fractions (TP25 sets) from 1/16” thru 1”. TPF800-L Library is composed of 800 gages with set nominals of 1/32”. Library includes all 1/32” fractions (TP25 sets) from 1/32” thru 1”. TPF1600-L Library is composed of 1,600 gages with set nominals in 64ths. Library includes all 64ths in fractional (TP25 sets) from 1/64” thru 1”.

Good design engineering dictates hole sizes dimensioned for standard cutting tools. TPF Gage-Libraries tailor measuring capability around these dimensions which are, most often, fractional sizes. A review of workpiece drawings will provide a basis for selecting the TPF Gage-Library that best meets your needs. Applications are almost unlimited when “X” standards are available on your shelf; qualifying hole size to within a .0001”, around fractional diameters, zeroing comparators, setting snap gages, precision arbors, hole layout and spacing, micrometer checking, etc.

TPF400-L (range, 1/16” thru 1”) 400 gages, 1/16” nominals.
Stor-Gage Cabinet: 1 large
$3,493.80

 
TPF800-L (range, 1/32” thru 1”) 800 gages, 1/32” nominals.
Stor-Gage Cabinets: 1 small, 1 medium, 1 large
$6,541.60

 
TPF1600-L (range,1/64” thru 1”) 1,600 gages, 1/64” nominals.
Stor-Gage Cabinets: 1 small, 1 medium, 1 large
$13,223.60

Gage Library
THS (.001” STEP) GAGE LIBRARIES

THS Gage-Libraries provide .001” step coverage by full thousandths (.030”, .031”, .032”, etc.) the broadest coverage with the least number of gages. 983 gages cover the broadest THS range, from .030” thru 1.012”. Selective coverage is also offered. If, for example, your production is limited to holes under 1/2”, a THS483-L Library offers 483 gages ranging from .030” thru .512” in every thousandth step.

Low per gage cost, broad thousandths step coverage and Class “X” precision combine to make these Gage-Library combinations a natural choice for use as cylindrical setting standards. You will always have a cylindrical “master” within .0005” of a desired “zero” dimension. With the dial spread of an electronic amplifier or dial indicator, you can effectively zero and measure any cylindrical part within the range of the THS Gage-Library you purchase.

Direct functional hole measurement for screw machine production, precision sheet metal work, drilling applications and many other types of rough machining operations is ideally performed with “X” standards in these combinations.

THS358-L (range, .030” thru .387”) 358 gages in .001” steps.
Stor-Gage Cabinet:1 small
$2,185.00

 
THS483-L (range, .030” thru .512”) 483 gages in .001” steps.
Stor-Gage Cabinets:1 small, 1 medium
$3,041.00

 
THS608-L (range, .030” thru .637”) 608 gages in .001” steps.
Stor-Gage Cabinets:1 small, 1 medium
$4,258.00

 
THS733-L (range, .030” thru .762”) 733 gages in .001” steps.
Stor-Gage Cabinets:1 small, 1 medium, 1 large
$5,541.00

THS500-L (range, .513” thru 1.012”) 500 gages in .001” steps.
Stor-Gage Cabinet:1 large
$5,182.00

THS375-L (range .638” thru 1.012”) 375 gages in .001” steps.
Stor-Gage Cabinet:1 large
$4,317.00

THS983-L (range .030” thru 1.012”) 983 gages in .001 steps.
Stor-Gage Cabinets:1 small, 1 medium, 1 large
$8,580.00

Gage Library

Metric Gage Libraries

A really economical solution to an age-old problem. Deltronic Gage libraries are priced low – as low as $8.40 per gage. That translates into many more gages for your budget dollars. Saves you much more over the individual unit price. From your choice of standard “Metric X” libraries to an almost unlimited selection of specials. That choice can range from .1000mm to 25.7000mm in .0100mm, .0200mm, .0500mm, .0050mm and .0025mm incremental steps.

.0025mm Step “Metric X” Gage-Libraries

25PPM1920-L (range .2000mm thru 4.9975mm) 1,920 gages in .0025mm steps.
Stor-Gage cabinets: 3 small
$17,239.00

 
25PPM2016-L (range 5.0000mm thru 10.0375mm) 2,016 gages in .0025mm steps.
Stor-Gage cabinets: 3 small, 1 medium
$16,935.00

.0050mm Step “Metric X” Gage-Libraries

05PM960-L (range .2000mm thru 4.9950mm) 960 gages in .0050mm steps.
Stor-Gage cabinets: 2 small
$8,620.00

 
05PM1008-L (range 5.000mm thru 10.0350mm) 1008 gages in .0050mm steps.
Stor-Gage cabinets: 1 small, 1 medium
$8,467.00

 
05PM1968-L (range .2000mm thru 10.0350mm) 1968 gages in .0050mm steps.
Stor-Gage cabinets: 2 small, 1 medium
$17,088.00

.0500mm Step “Metric X” Gage-Libraries

50PM499-L (range .5000mm thru 25.4000mm) 499 gages in .0500mm steps.
Stor-Gage cabinet: 1 large
$5,103.00

.0100mm Step “Metric X” Gage-Libraries

10PM981-L (range .2000mm thru 10.0000mm) 981 gages in .0100mm steps.
Stor-Gage cabinets: 2 small
$8,519.00

 
10PM1539-L (range 10.0200mm thru 25.4000mm) 1,539 gages in .0100mm steps.
Stor-Gage cabinets: 1 medium, 2 large
$17,300.00

 
10PM2521-L (range .2000mm thru 25.4000mm) 2,521 gages in .0100mm steps.
Stor-Gage cabinets: 1 small, 2 medium, 2 large
$25,827.00

.0200mm Step “Metric X” Gage-Libraries

20PM491-L (range .2000mm thru 10.0000mm) 491 gages in .0200mm steps.
Stor-Gage cabinet: 1 small
$4,266.00

 
20PM770-L (range 10.0200mm thru 25.4000mm) 770 gages in .0200mm steps.
Stor-Gage cabinets: 1 medium, 1 large
$8,657.00

 
20PM1261-L (range .2000mm thru 25.4000mm) 1,261 gages in .0200mm steps.
Stor-Gage cabinets: 1 small, 1 medium, 1 large
$12,923.00

Inch Gage Libraries

Inch Gage Libraries

TP (.0001” step) MASTER-REFERENCE GAGE-LIBRARIES

Proven in concept, Master-Reference Gage-Libraries offer you an unlimited Class “X” gaging capability as an in-plant resource. Covering your particular range of hole sizes with every tenth (.0001”) step, these single-tolerance gages anticipate every size and accuracy requirement.

Typically, these Master-Reference Gage-Libraries are centrally located, in a standards or inspection facility. As the source of  cylindrical gages for various departments within the plant, they eliminate the duplications and delays normally incurred in obtaining gages to satisfy many small orders for individual department requirements. They present a constant availability as cylindrical masters for setting various measuring tools to precise dimensions, checking a variety of hole sizes in prototype parts, hole spacing and layout work, etc.

Six comprehensive ranges of .0001” (tenth) increment gages satisfy a variety of typical requirements. Ranges begin with .0070” and end on popular fractions (1/8”, 1/4”, 3/8”, etc.). If you are concerned with hole sizes of 1/8” or smaller, select the TP1193-L ranging from .0070” thru .1262”, with every .0001” size gage. Each library provides 12 tenth steps beyond the end fraction for flexibility of measurement around that fraction.

TP1193-L (range .0070” thru .1262”) 1,193 gages in .0001” steps.
Stor-Gage Cabinets: 2 small
$7,366.00

 
TP2443-L (range .0070” thru .2512”) 2,443 gages in .0001” steps.
Stor-Gage Cabinets: 4 small
$14,905.00

 
TP3693-L (range .0070” thru .3762”) 3,693 gages in .0001” steps.
Stor-Gage Cabinets: 5 small
$22,236.00

 
TP4943-L (range .0070” thru .5012”) 4,943 gages in .0001” steps.
Stor-Gage Cabinets: 6 small, 3 medium
$31,789.00

 
TP7443-L (range .0070” thru .7512”) 7,443 gages in .0001” steps.
Stor-Gage Cabinets: 6 small, 5 medium, 2 large
$53,877.00

 

TP10081-L carries the entire Deltronic range with every .0001” size from .0040” thru 1.0120”, a total of 10,081 gages  Stor-Gage Cabinets: 5 small, 5 medium, 7 large
$84,118.00

HT (.0005” step) GAGE-LIBRARIES

HT Half Thousands Gage-Libraries are available in .0005” increments in six ranges within a size coverage of .0260” thru 1.0095”.

When gaging requirements are for functional hole inspection, with tolerances in thousandths…qualification of rejects as to whether they can be reworked…immediately available cylindrical standards providing a master gage that is within 2 tenths of desired size for comparator settings, these Certified HT Gage Libraries, composed of Class “X” Deltronics in .0005” increments, meet your requirements. Even for less exacting tolerances, the low Deltronic price will more than justify your investing in an HT Gage-Library to answer tomorrow’s gaging problem, without production or inspection delays.

HT360-L (range .0260” thru .2055”) 360 gages in .0005” steps.
Stor-Gage Cabinet: 1 small
$2,145.00

 
HT720-L (range .0260” thru .3855”) 720 gages in .0005” steps.
Stor-Gage Cabinet: 1 small
$4,143.00

 
HT960-L (range .0260” thru .5055”) 960 gages in .0005” steps.
Stor-Gage Cabinets: 1 small, 1 medium
$6,169.00

 
HT1200-L (range .0260” thru .6255”) 1,200 gages in .0005” steps.
Stor-Gage Cabinets: 1 small, 1 medium
$7,819.00

 
HT1464-L (range .0260” thru .7575”) 1,464 gages in .0005” steps.
Stor-Gage Cabinets: 1 small, 1 medium, 1 large
$10,753.00

 
HT1968-L (range .0260” thru 1.0095”) 1,968 gages in .0005” steps.
Stor-Gage Cabinets: 1 small, 1 medium, 2 large
$16,556.00

TPF FRACTIONAL (.0001” step) GAGE-LIBRARIES

TPF Libraries are composed of 25 gage sets, each with a center fractional nominal and 12 gages, in .0001” STEPS RANGING DOWN- WARD from the fractional nominal and 12 STEPS RANGING UPWARD.

TPF400-L Library is composed of 400 gages with set nominals of 1/16”. Library includes all 1/16” fractions (TP25 sets) from 1/16” thru 1”. TPF800-L Library is composed of 800 gages with set nominals of 1/32”. Library includes all 1/32” fractions (TP25 sets) from 1/32” thru 1”. TPF1600-L Library is composed of 1,600 gages with set nominals in 64ths. Library includes all 64ths in fractional (TP25 sets) from 1/64” thru 1”.

Good design engineering dictates hole sizes dimensioned for standard cutting tools. TPF Gage-Libraries tailor measuring capability around these dimensions which are, most often, fractional sizes. A review of workpiece drawings will provide a basis for selecting the TPF Gage-Library that best meets your needs. Applications are almost unlimited when “X” standards are available on your shelf; qualifying hole size to within a .0001”, around fractional diameters, zeroing comparators, setting snap gages, precision arbors, hole layout and spacing, micrometer checking, etc.

TPF400-L (range, 1/16” thru 1”) 400 gages, 1/16” nominals.
Stor-Gage Cabinet: 1 large
$3,493.80

 
TPF800-L (range, 1/32” thru 1”) 800 gages, 1/32” nominals.
Stor-Gage Cabinets: 1 small, 1 medium, 1 large
$6,541.60

 
TPF1600-L (range,1/64” thru 1”) 1,600 gages, 1/64” nominals.
Stor-Gage Cabinets: 1 small, 1 medium, 1 large
$13,223.60

Gage Library
THS (.001” STEP) GAGE LIBRARIES

THS Gage-Libraries provide .001” step coverage by full thousandths (.030”, .031”, .032”, etc.) the broadest coverage with the least number of gages. 983 gages cover the broadest THS range, from .030” thru 1.012”. Selective coverage is also offered. If, for example, your production is limited to holes under 1/2”, a THS483-L Library offers 483 gages ranging from .030” thru .512” in every thousandth step.

Low per gage cost, broad thousandths step coverage and Class “X” precision combine to make these Gage-Library combinations a natural choice for use as cylindrical setting standards. You will always have a cylindrical “master” within .0005” of a desired “zero” dimension. With the dial spread of an electronic amplifier or dial indicator, you can effectively zero and measure any cylindrical part within the range of the THS Gage-Library you purchase.

Direct functional hole measurement for screw machine production, precision sheet metal work, drilling applications and many other types of rough machining operations is ideally performed with “X” standards in these combinations.

THS358-L (range, .030” thru .387”) 358 gages in .001” steps.
Stor-Gage Cabinet:1 small
$2,185.00

 
THS483-L (range, .030” thru .512”) 483 gages in .001” steps.
Stor-Gage Cabinets:1 small, 1 medium
$3,041.00

 
THS608-L (range, .030” thru .637”) 608 gages in .001” steps.
Stor-Gage Cabinets:1 small, 1 medium
$4,258.00

 
THS733-L (range, .030” thru .762”) 733 gages in .001” steps.
Stor-Gage Cabinets:1 small, 1 medium, 1 large
$5,541.00

THS500-L (range, .513” thru 1.012”) 500 gages in .001” steps.
Stor-Gage Cabinet:1 large
$5,182.00

THS375-L (range .638” thru 1.012”) 375 gages in .001” steps.
Stor-Gage Cabinet:1 large
$4,317.00

THS983-L (range .030” thru 1.012”) 983 gages in .001 steps.
Stor-Gage Cabinets:1 small, 1 medium, 1 large
$8,580.00

Gage Library
Metric Gage Libraries

Metric Gage Libraries

A really economical solution to an age-old problem. Deltronic Gage libraries are priced low – as low as $8.40 per gage. That translates into many more gages for your budget dollars. Saves you much more over the individual unit price. From your choice of standard “Metric X” libraries to an almost unlimited selection of specials. That choice can range from .1000mm to 25.7000mm in .0100mm, .0200mm, .0500mm, .0050mm and .0025mm incremental steps.

.0025mm Step “Metric X” Gage-Libraries

25PPM1920-L (range .2000mm thru 4.9975mm) 1,920 gages in .0025mm steps.
Stor-Gage cabinets: 3 small
$17,239.00

 
25PPM2016-L (range 5.0000mm thru 10.0375mm) 2,016 gages in .0025mm steps.
Stor-Gage cabinets: 3 small, 1 medium
$16,935.00

.0050mm Step “Metric X” Gage-Libraries

05PM960-L (range .2000mm thru 4.9950mm) 960 gages in .0050mm steps.
Stor-Gage cabinets: 2 small
$8,620.00

 
05PM1008-L (range 5.000mm thru 10.0350mm) 1008 gages in .0050mm steps.
Stor-Gage cabinets: 1 small, 1 medium
$8,467.00

 
05PM1968-L (range .2000mm thru 10.0350mm) 1968 gages in .0050mm steps.
Stor-Gage cabinets: 2 small, 1 medium
$17,088.00

.0500mm Step “Metric X” Gage-Libraries

50PM499-L (range .5000mm thru 25.4000mm) 499 gages in .0500mm steps.
Stor-Gage cabinet: 1 large
$5,103.00

.0100mm Step “Metric X” Gage-Libraries

10PM981-L (range .2000mm thru 10.0000mm) 981 gages in .0100mm steps.
Stor-Gage cabinets: 2 small
$8,519.00

 
10PM1539-L (range 10.0200mm thru 25.4000mm) 1,539 gages in .0100mm steps.
Stor-Gage cabinets: 1 medium, 2 large
$17,300.00

 
10PM2521-L (range .2000mm thru 25.4000mm) 2,521 gages in .0100mm steps.
Stor-Gage cabinets: 1 small, 2 medium, 2 large
$25,827.00

.0200mm Step “Metric X” Gage-Libraries

20PM491-L (range .2000mm thru 10.0000mm) 491 gages in .0200mm steps.
Stor-Gage cabinet: 1 small
$4,266.00

 
20PM770-L (range 10.0200mm thru 25.4000mm) 770 gages in .0200mm steps.
Stor-Gage cabinets: 1 medium, 1 large
$8,657.00

 
20PM1261-L (range .2000mm thru 25.4000mm) 1,261 gages in .0200mm steps.
Stor-Gage cabinets: 1 small, 1 medium, 1 large
$12,923.00

Steel Stor-Gage Cabinets (When Purchased Separately)

SMALL – CAB30-S
Space for 30 Deltronic 25-gage set cases, small-size, for gages .0070” thru .3872”.  Holds up to 750 gages.
21 1/16” W, 17 1/4” H,  6 3/4” D.
Approx weight 31 lbs.
$296.00

MEDIUM – CAB20-M
Space for 20 Deltronic 25-gage set cases, medium-size, for gages .3873” thru .6375”. (Also for gages .0040” thru .0069” which are held in screw-top plastic vials.) Holds up to 500 gages.
21 1/16” W,  20 3/8” H,  8 7/16” D.
Approx weight 36 lbs.
$529.00

LARGE – CAB24-L
Space for 24 Deltronic 25-gage set cases, large-size, for gages .6376” thru 1.0120”. Holds up to 600 gages.
21 1/16” W,  30 1/8” H, 14 1/16” D.
Approx weight 60 lbs.
$594.00

Pin Gages
View Pin Gages
Pin Gages
My Subtitle
Pin Gage Sets
View Pin Gage Sets
Pin Gage Sets
My Subtitle
Thread Plug Gages
View Thread Plug Gages
Thread Plug Gages
My Subtitle
Thread Ring Gages
View Thread Ring Gages
Thread Ring Gages
My Subtitle
Pipe Thread & Ring Gages
View Pipe Thread Gages
Pipe Thread & Ring Gages
My Subtitle
Thread Measuring Wires
View Thread Measuring Wires
Thread Measuring Wires
My Subtitle
Gage Handles
View Gage Handles
Gage Handles
My Subtitle
Gear Measuring Wires
View Gear Measuring Wires
Gear Measuring Wires
My Subtitle
Taper Sine Blocks
View Taper Sine Blocks
Taper Sine Blocks
My Subtitle
Micro Ball Sets
View Micro Ball Sets
Micro Ball Sets
My Subtitle
Hi-Precision Grinding Logo

Grinding & Manufacturing with the Precision of Deltronic

CNC Machining, Grinding, Turning, Drilling, Milling, and Boring