
Class X Pin Gage Sets
plus 40 millionths, minus nothing.
The Deltronic Class X Gage set is a unique combination of plug gages offering hundreds of combinations for qualifying hole sizes in and around the nominal size. You can choose any combination of Go/ No-go tolerances or use the range to find the exact size of a hole.
This provides standards for zeroing comparators, setting snap gages, micrometer checking, hole center and layout determination, precision arbors for staging parts and checking runout of blanks. With more than 10,000 sets available you will find the correct set for any environment and job.
Metric Gage Sets
HTM24 (.0050MM STEP) GAGE-SETS
HTM24 “Metric X” Gage-Sets consist of a nominal size gage plus 23 gages in SIZES RANGING UPWARD only from the nominal in .0050mm steps. Nominal determines set coverage.
THM25 (.0100mm step) GAGE-SETS
THM25 (.0100mm step) Gage-Sets contain a center nominal size gage plus 12 SIZES RANGING UPWARD in .0100mm steps above the nominal and 12 SIZES RANGING DOWNWARD in .0100mm steps below the nominal. Nominal determines set coverage.
PPM25 (.0025mm step) GAGE-SETS
PPM25 “Metric X” Gage-Sets contain a center nominal size gage plus 12 SIZES RANGING UPWARD in .0025mm steps above the nominal and 12 SIZES RANGING DOWNWARD in .0025mm steps below the nominal. Sets may be ordered with any desired nominal size, as needed. The price of the set is shown in various ranges as listed below. Nominal determines set coverage.
- Inch Gage Sets
-
- Metric Gage Sets
-
Metric Gage Sets
HTM24 (.0050MM STEP) GAGE-SETS
HTM24 “Metric X” Gage-Sets consist of a nominal size gage plus 23 gages in SIZES RANGING UPWARD only from the nominal in .0050mm steps. Nominal determines set coverage.
THM25 (.0100mm step) GAGE-SETS
THM25 (.0100mm step) Gage-Sets contain a center nominal size gage plus 12 SIZES RANGING UPWARD in .0100mm steps above the nominal and 12 SIZES RANGING DOWNWARD in .0100mm steps below the nominal. Nominal determines set coverage.
PPM25 (.0025mm step) GAGE-SETS
PPM25 “Metric X” Gage-Sets contain a center nominal size gage plus 12 SIZES RANGING UPWARD in .0025mm steps above the nominal and 12 SIZES RANGING DOWNWARD in .0025mm steps below the nominal. Sets may be ordered with any desired nominal size, as needed. The price of the set is shown in various ranges as listed below. Nominal determines set coverage.
