Gage Handles

Deltronic 2-End AGD Handles

Permanently stamp-marked to your specification.
Pin Gage

INCH OR GOLD METRIC
Price of handle includes 2 bushings. Please specify sizes as bushings have limited range.

To order handles specify:
1. Two bushing sizes for each handle according to size of each gage.
2. Handle Number (2W, 4W etc.).

Handle Marking:
$3.00 extra per handle for up to 3 flats-GO SIZE, NO·GO SIZE, or your gage control code (up to 12 digits). ($3.00 more for any additional copy)

Size Inch Metric Price
1W .0 – .075 .0000mm – 1.9000mm 18.00
2W .075 – .180 1.9100mm – 4.5700mm 19.00
3W .180 – .281 4.5700mm – 7.1300mm 20.00
4W .281 – .406 7.1300mm – 10.3100mm 21.00
5W .406 – .510 10.3100mm – 12.9500mm 23.00
6W .510 – .635 12.9500mm – 16.1000mm 29.00
7W .635 – .760 16.1000mm – 19.3000mm 33.00
8W .760 – 1.012 19.3100mm – 25.7000mm 43.00

Split / Mate Gage Handles

Convertible Single-End or Double-End Gage Handles
Pin Gage

IMPROVED GAGE HANDLING AND PROTECTION
Split/Mate gage handles on individual gages provide the means, as well as the encouragement, for proper gage handling.

QUICK MAKE-UP OF GO/NO-GO COMBINATIONS
When GO/NO-GO combinations are selected from gages equipped with Split/Mate gage handles, the two sizes can be mated in a typical GO/NO-GO handle configuration in a fraction of the time required by conventional handles.

This unusual flexibility can reduce the number of duplicate sizes needed where gages are otherwise locked-in to obsolete GO/
NO-GO combinations in conventional handles.

Consider also that GO/NO-GO combinations in Split/Mate gage handles may be size labeled and sealed with Deltronic Tamper-Proof Calibration Labels to preserve their integrity on the job and to simplify calibration recycling.

PHYSICAL CONTROL/PROGRAMMING OF GAGE WEAR/CALIBRATION
The Split/Mate handles provide an unusually effective physical means of calibration programming each gage to reduce calibration
costs, maintain accuracy-in-use and fully utilize the gage’s useful-life potential.

Reversible plug gages, without handles, are subject to random use and wear of both ends. The physical presence of the Split / Mate gage handle on a gage makes it possible to limit use to one end, which can be effectively controlled by calibration cycling for guaranteed accuracy during use.

Size Range Price Threaded Coupler
1W-SM .000″ – .075″ $8.40 $7.50
2W-SM .075″ – .180″ $8.40 $7.80
3W-SM .180″ – .281″ $9.60 $8.50
4W-SM .281″ – .406″ $11.70 $9.00
5W-SM .406″ – .510″ $13.80 $9.50
6W-SM .510″ – .635″ $18.30 $11.30
7W-SM .635″ – .760″ $21.80 $14.10
8W-SM .760″ – 1.012″ $32.30 $17.00
AGD Handles

Deltronic 2-End AGD Handles

Permanently stamp-marked to your specification.
Pin Gage

INCH OR GOLD METRIC
Price of handle includes 2 bushings. Please specify sizes as bushings have limited range.

To order handles specify:
1. Two bushing sizes for each handle according to size of each gage.
2. Handle Number (2W, 4W etc.).

Handle Marking:
$3.00 extra per handle for up to 3 flats-GO SIZE, NO·GO SIZE, or your gage control code (up to 12 digits). ($3.00 more for any additional copy)

Size Inch Metric Price
1W .0 – .075 .0000mm – 1.9000mm 18.00
2W .075 – .180 1.9100mm – 4.5700mm 19.00
3W .180 – .281 4.5700mm – 7.1300mm 20.00
4W .281 – .406 7.1300mm – 10.3100mm 21.00
5W .406 – .510 10.3100mm – 12.9500mm 23.00
6W .510 – .635 12.9500mm – 16.1000mm 29.00
7W .635 – .760 16.1000mm – 19.3000mm 33.00
8W .760 – 1.012 19.3100mm – 25.7000mm 43.00
Split / Mate Gage Handles

Split / Mate Gage Handles

Convertible Single-End or Double-End Gage Handles
Pin Gage

IMPROVED GAGE HANDLING AND PROTECTION
Split/Mate gage handles on individual gages provide the means, as well as the encouragement, for proper gage handling.

QUICK MAKE-UP OF GO/NO-GO COMBINATIONS
When GO/NO-GO combinations are selected from gages equipped with Split/Mate gage handles, the two sizes can be mated in a typical GO/NO-GO handle configuration in a fraction of the time required by conventional handles.

This unusual flexibility can reduce the number of duplicate sizes needed where gages are otherwise locked-in to obsolete GO/
NO-GO combinations in conventional handles.

Consider also that GO/NO-GO combinations in Split/Mate gage handles may be size labeled and sealed with Deltronic Tamper-Proof Calibration Labels to preserve their integrity on the job and to simplify calibration recycling.

PHYSICAL CONTROL/PROGRAMMING OF GAGE WEAR/CALIBRATION
The Split/Mate handles provide an unusually effective physical means of calibration programming each gage to reduce calibration
costs, maintain accuracy-in-use and fully utilize the gage’s useful-life potential.

Reversible plug gages, without handles, are subject to random use and wear of both ends. The physical presence of the Split / Mate gage handle on a gage makes it possible to limit use to one end, which can be effectively controlled by calibration cycling for guaranteed accuracy during use.

Size Range Price Threaded Coupler
1W-SM .000″ – .075″ $8.40 $7.50
2W-SM .075″ – .180″ $8.40 $7.80
3W-SM .180″ – .281″ $9.60 $8.50
4W-SM .281″ – .406″ $11.70 $9.00
5W-SM .406″ – .510″ $13.80 $9.50
6W-SM .510″ – .635″ $18.30 $11.30
7W-SM .635″ – .760″ $21.80 $14.10
8W-SM .760″ – 1.012″ $32.30 $17.00
Bushings

Two bushings are included in price of each AGD handle. 1 bushing is included in price of each Split/Mate handle.

$5.00 Each
Bushing Number Inch Size Range Metric Size Range
1W 010 0 – 0.010 0 – 0.25
015 0.010 – 0.015 0.25 – 0.38
020 0.015 – 0.020 0.38 – 0.51
025 0.020 – 0.025 0.51 – 0.64
030 0.025 – 0.030 0.64 – 0.76
035 0.030 – 0.035 0.76 – 0.89
040 0.035 – 0.040 0.89 – 1.02
045 0.040 – 0.045 1.02 – 1.14
050 0.045 – 0.050 1.14 – 1.27
055 0.050 – 0.055 1.27 – 1.40
060 0.055 – 0.060 1.40 – 1.52
065 0.060 – 0.065 1.52 – 1.65
070 0.065 – 0.070 1.65 – 1.78
075 0.070 – 0.075 1.78 – 1.91
$5.00 Each
Bushing Number Inch Size Range Metric Size Range
2W 082 0.075 – 0.082 1.91 – 2.08
089 0.082 – 0.089 2.08 – 2.26
096 0.089 – 0.096 2.26 – 2.44
103 0.096 – 0.103 2.44 – 2.62
110 0.103 – 0.110 2.62 – 2.79
117 0.110 – 0.117 2.79 – 2.97
124 0.117 – 0.124 2.97 – 3.15
131 0.124 – 0.131 3.15 – 3.33
138 0.131 – 0.138 3.33 – 3.51
145 0.138 – 0.145 3.51 – 3.68
152 0.145 – 0.152 3.68 – 3.86
159 0.152 – 0.159 3.86 – 4.04
166 0.159 – 0.166 4.04 – 4.22
173 0.166 – 0.173 4.22 – 4.39
180 0.173 – 0.180 4.39 – 4.57
$5.00 Each
Bushing Number Inch Size Range Metric Size Range
3W 188 0.180 – 0.188 4.57 – 4.78
196 0.188 – 0.196 4.78 – 4.98
204 0.196 – 0.204 4.98 – 5.18
212 0.204 – 0.212 5.18 – 5.38
220 0.212 – 0.220 5.38 – 5.59
228 0.220 – 0.228 5.59 – 5.79
236 0.228 – 0.236 5.79 – 5.99
244 0.236 – 0.244 5.99 – 6.20
252 0.244 – 0.252 6.20 – 6.40
261 0.252 – 0.261 6.40 – 6.63
271 0.261 – 0.271 6.63 – 6.88
281 0.271 – 0.281 6.88 – 7.14
$5.00 Each
Bushing Number Inch Size Range Metric Size Range
4W 291 0.281 – 0.291 7.14 – 7.39
301 0.291 – 0.301 7.39 – 7.65
311 0.301 – 0.311 7.65 – 7.90
321 0.311 – 0.321 7.90 – 8.15
331 0.321 – 0.331 8.15 – 8.41
341 0.331 – 0.341 8.41 – 8.66
351 0.341 – 0.351 8.66 – 8.92
361 0.351 – 0.361 8.92 – 9.17
371 0.361 – 0.371 9.17 – 9.42
382 0.371 – 0.382 9.42 – 9.70
394 0.382 – 0.394 9.70 – 10.01
406 0.394 – 0.406 10.01 – 10.31
$6.00 Each
Bushing Number Inch Size Range Metric Size Range
5W 420 0.406 – 0.420 10.31 – 10.67
435 0.420 – 0.435 10.67 – 11.05
450 0.435 – 0.450 11.05 – 11.43
465 0.450 – 0.465 11.43 – 11.81
480 0.465 – 0.480 11.81 – 12.19
495 0.480 – 0.495 12.19 – 12.57
510 0.495 – 0.510 12.57 – 12.95
$6.00 Each
Bushing Number Inch Size Range Metric Size Range
6W 532 0.510 – 0.532 12.95 – 13.51
547 0.532 – 0.547 13.51 – 13.89
563 0.547 – 0.563 13.89 – 14.30
579 0.563 – 0.579 14.30 – 14.71
594 0.579 – 0.594 14.71 – 15.09
610 0.594 – 0.610 15.09 – 15.49
625 0.610 – 0.625 15.49 – 15.88
635 0.625 – 0.635 15.88 – 16.13
$6.00 Each
Bushing Number Inch Size Range Metric Size Range
7W 656 0.635 – 0.656 16.13 – 16.66
672 0.656 – 0.672 16.66 – 17.07
688 0.672 – 0.688 17.07 – 17.48
704 0.688 – 0.704 17.48 – 17.88
719 0.704 – 0.719 17.88 – 18.26
735 0.719 – 0.735 18.26 – 18.67
750 0.735 – 0.750 18.67 – 19.05
760 0.750 – 0.760 19.05 – 19.30
$6.00 Each
Bushing Number Inch Size Range Metric Size Range
8W 781 0.760 – 0.781 19.30 – 19.84
812 0.781 – 0.812 19.84 – 20.62
843 0.812 – 0.843 20.62 – 21.41
875 0.843 – 0.875 21.41 – 22.23
906 0.875 – 0.906 22.23 – 23.01
937 0.906 – 0.937 23.01 – 23.80
968 0.937 – 0.968 23.80 – 24.59
1000 0.968 – 1.012 24.59 – 25.70
Pin Gages
View Pin Gages
Pin Gages
My Subtitle
Pin Gage Sets
View Pin Gage Sets
Pin Gage Sets
My Subtitle
Pin Gage Libraries
View Pin Gage Libraries
Pin Gage Libraries
My Subtitle
Thread Measuring Wires
View Thread Measuring Wires
Thread Measuring Wires
My Subtitle
Gear Measuring Wires
View Gear Measuring Wires
Gear Measuring Wires
My Subtitle
Gage Handles
View Gage Handles
Gage Handles
My Subtitle
Hi-Precision Grinding Logo

Grinding & Manufacturing with the Precision of Deltronic

CNC Machining, Grinding, Turning, Drilling, Milling, and Boring